Free 70-342 Questions Answers
You need to recommend an Outlook protection rule solution to meet the technical requirements.
What should you recommend?
A. Create an Outlook protection rule and filter the rule based on the FromDepartment property.
Apply the Do Not Forward protection template to the rule and enable the UserCanOverride setting.
B. Create an Outlook protection rule and filter the rule based on the FromDepartment property.
Apply the Do Not Forward protection template to the rule and disable the UserCanOverride setting.
C. Create an Outlook protection rule and filter the rule based on the SentTo property. Apply the Do Not
Forward protection template to the rule and disable the
D. Create an Outlook protection rule and filter the rule based on the SentTo property. Apply the Do Not
Forward protection template to the rule and enable the
Prevent the forwarding of email messages sent by users who have a value of Legal in their Department field.
* Use FromDepartment property and do not allow the user to override.
Free 70-341 Questions Answers
You need to recommend a design that meets the technical requirements for communication between Fabrikam and A. Datum.
Which three actions should you perform in fabrikam.com? (Each correct answer presents part of the solution. Choose three.)
A. Create a remote domain for adatum.com.
B. Exchange certificates with the administrators of adatum.com.
C. From EDGE1, create a Send connector that has an address space for adatum.com
D. Run the Set-TransportConfigcmdlet.
E. Run the Set-TransportServercmdlet.
F. From a Mailbox server, create a Send connector that has an address space for adatum.com.
Applies to: Exchange Server 2013, Exchange Online
Remote domains are SMTP domains that are external to your Microsoft Exchange organization. You can create remote domain entries to define the settings for
message transferred between your Exchange organization and specific external domains. The settings in the remote domain entry for a specific external domain
override the settings in the default remote domain that normally apply to all external recipients. The remote domain settings are global for the Exchange
You can create remote domain entries to define the settings for message transfers between your Exchange Online organization and external domains. When you
create a remote domain entry, you control the types of messages that are sent to that domain. You can also apply message format policies and acceptable
character sets for messages that are sent from users in your organization to the remote domain.
Edge1 is in the perimeter network and the send connector needs to be created on a mailbox server
Use the Set-TransportServer cmdlet to set the transport configuration options for the Transport service on Mailbox servers or for Edge Transport servers.
This example sets the DelayNotificationTimeout parameter to 13 hours on server named Mailbox01.
Set-TransportServer Mailbox01 -DelayNotificationTimeout 13:00:00
Need Set-TransportConfig and the TLSReceiveDomainSecureList parameter to specify the domains from which you want to receive domain secured email by using
mutual Transport Layer Security (TLS) authentication.
o activate SSL encryption on an Exchange server, you need a server certificate on the Client Access Server in each company. The client access server is the internet facing server in an organization.
An SSL certificate is a digital certificate that authenticates the identity of the exchange server and encrypts information that is sent to the server using Secure
Sockets Layer (SSL) technology
Mailbox server certificates
One key difference between Exchange 2010 and Exchange 2013 is that the certificates that are used on the Exchange 2013 Mailbox server are self-signed
Because all clients connect to an Exchange 2013 Mailbox server through an Exchange 2013 Client Access server, the only certificates that you need to manage are
those on the Client Access server.
The Client Access server automatically trusts the self-signed certificate on the Mailbox server, so clients will not receive warnings about a self-signed certificate not
being trusted, provided that the Client Access server has a non-self-signed certificate from either a Windows certification authority (CA) or a trusted third party.
There are no tools or cmdlets available to manage self-signed certificates on the Mailbox server. After the server has been properly installed, you should never need
to worry about the certificates on the Mailbox server.
Use the Set-TransportConfig cmdlet to modify the transport configuration settings for the whole
This example configures the Exchange organization to forward all DSN messages that have the DSN codes
5.7.1, 5.7.2, and 5.7.3 to the postmaster email account.
Set-TransportConfig -GenerateCopyOfDSNFor 5.7.1,5.7.2,5.7.3
The TLSReceiveDomainSecureList parameter specifies the domains from which you want to receive domain secured email by using mutual Transport Layer
Security (TLS) authentication.
F If you want to ensure secure, encrypted communication with a
partner, you can create a
Send connector that is configured to enforce Transport Layer Security
(TLS) for messages sent to a partner domain. TLS provides secure communication over the Internet.
Use the EAC to create a Send connector to send email to a partner, with TLS applied
To create a Send connector for this scenario, log in to the EAC and perform the following steps:
In the EAC, navigate to Mail flow > Send connectors, and then click Add .
In the New send connector wizard, specify a name for the send connector and then select Partner for the Type.
When you select Partner, the connector is configured to allow connections only to servers that authenticate with TLS certificates. Click Next.
Verify that MX record associated with recipient domain is selected, which specifies that the connector uses the domain name system (DNS) to route mail. Click
Under Address space, click Add . In the Add domain window, make sure SMTP is listed as the Type. For Fully Qualified Domain Name (FQDN), enter the name of
your partner domain. Click Save.
For Source server, click Add . In the Select a server window, select a Mailbox server that will be used to send mail to the Internet via the Client Access server and
click Add . After you’ve selected the server, click Add .
Once you have created the Send connector, it appears in the Send connector list.
In Microsoft Exchange Server 2013, a Send connector controls the flow of outbound messages to the receiving server.
They are configured on Mailbox servers running the Transport service. Most commonly, you configure a Send connector to send outbound email messages to a
smart host or directly to their recipient, using DNS.
Exchange 2013 Mailbox servers running the Transport service require Send connectors to deliver messages to the next hop on the way to their destination.
Send connectors that are created on Mailbox servers are stored in Active Directory and are available to all Mailbox servers running the Transport service in the
Send Connectors: Exchange 2013 Help
Free 70-331 Questions Answers
You need to implement corporate sizing and performance guidelines for general usage scenarios.
Which three actions should you perform? (Each correct answer presents part of the solution.
A. For the Remote BLOB Storage (RBS) storage subsystem on network attached storage (NAS), limit the maximum time-to-first-byte (TTFB) of any response from
the NAS to 100 milliseconds.
B. Limit the maximum size of each content database to 4 TB.
C. For the Remote BLOB Storage (RBS) storage subsystem on network attached storage (NAS), limit the maximum time-to-first-byte (TTFB) of any response from
the NAS to 20 milliseconds.
D. Limit the number of documents in each document library to 20 million.
E. Limit the number of documents in each content database to 10 million.
F. Limit the maximum size of each content database to 200 GB.
C: Network Attached Storage (NAS) is only supported by SharePoint 2013 with iSCSI and if TTFB is less than 20ms.
E: The largest number of items per content database that has been tested on SharePoint Server 2013 is 60 million items, including documents and list items. If you
plan to store more than 60 million items in SharePoint Server 2013, you must deploy multiple content databases.
F: We strongly recommended limiting the size of content databases to 200 GB, except when the circumstances in the following rows in this table apply.
If you are using Remote BLOB Storage (RBS), the total volume of remote BLOB storage and metadata in the content database must not exceed this limit.
Note: The use of RBS-enabled content databases larger than 4TB with collaboration sites is not supported.
Reference: Plan for RBS in SharePoint 2013
Reference: Software boundaries and limits for SharePoint 2013
Free 70-247 Questions Answers
Your company has a private cloud that is managed by using a System Center 2012 Operations Manager infrastructure.
You deploy Microsoft Share Point Foundation 2010.
You have an Operations Manager Web Part.
You need to ensure that the Web Part is available on the SharePoint site.
What should you do first?
A. Configure the Web Part solution.
B. Deploy the Web Part to the SharePoint site.
C. Configure the Web Part to use shared credentials.
D. Add the Web Part to a webpage.
Before you can add the Operations Manager Web Part to a SharePoint page, the Web Part must be deployed to the SharePoint site.
Free 70-243 Questions Answers
Your network contains a System Center 2012 Configuration Manager environment. You need to receive an email message every day that lists all non-compliant clients. What should you do?
A. Create an alert subscription.
B. Configure a Microsoft SQL Server Reporting Services (SSRS) report.
C. Configure an in-console alert.
D. Create a ConfigMgr query.
Correct Answer: B
Configure report subscription is with the same procedure as standard SQL report service
Free 74-678 Questions Answers
A Datum is evaluating moving the licensing of its desktop platform products to Office 365.
Which three licenses will make up its desktop platform? Each correct answer presents part of the solution.
A. Office 365 ProPlus
B. Windows Intune
C. Windows 8.1 Enterprise
D. Microsoft Core CAL Suite Bridge for Office 365
E. Office 365 Enterprise E3
A: When you deploy Office 365 ProPlus, it’s installed on the user’s local computer. Office 365 ProPlus is
offered as a monthly subscription.
D: Microsoft Client Access License (CAL) Suite Bridges are used when you are transitioning from a CAL
Suite (on premises) to a comparable Product and Online Service combination.
A Datum wants to improve the manageability and control of the users’ desktops. In the short term, the
company will deploy Windows 8.1 Enterprise and Office Professional Plus 2013 internally. During the next
six months, A Datum plans to implement a Virtual Desktop Infrastructure (VDI) by using Remote Desktop
Services (RDS) on Windows Server 2012 R2.
Free 70-688 Questions Answers
You administer a computer that runs Windows 8 Pro.
You need to create a backup copy of the computer system drive.
The backup copy must support a complete system drive restore to another computer.
What should you do?
A. Create a system restore point.
B. Run the bcdedit /export command.
C. Perfom a backup to a shared folder by using the wbadmin command with the -allcritical switch.
D. Create a system recovery drive.
Specifies that all critical volumes (volumes that contain operating system’s state) be included in the backups.
This parameter is useful if you are creating a backup for bare metal recovery.
It should be used only when-backupTarget is specified, otherwise the command will fail.
Can be used with the-include option.
Free 70-687 Questions Answers
A company has client computers that run Windows 8.1. The corporate network is configured for IPv4 and IPv6.
You need to disable Media Sensing for IPv6 on the client computers without affecting IPv4 communications.
What should you do on each client computer?
A. Run the Disable-NetAdapterBinding Windows PowerShell cmdlet.
B. Run the Disable-NetAdapter Windows PowerShell cmdlet.
C. Run the Set-NetlPv6Protocol Windows PowerShell cmdlet.
D. Run the Set-NetlPv4Protocol Windows PowerShell cmdlet.
Specifies a value for Media Sense. The cmdlet modifies the value for this setting.
Media Sense provides a mechanism for the network adapter to notify the protocol stack of media connect and disconnect events. These events trigger the DHCP
client to take an action, such as attempting to re- new a DHCP lease or removing routes that are related to a disconnected network. When Media Sense is enabled,
the network parameters on the laptop of a roaming user are automatically and transparently up- dated without requiring a restart when the user moves from one
location to another. The acceptable val- ues for this parameter are:
The default value is Enabled.
The Disable-NetAdapterBinding cmdlet disables a binding to a network adapter. Running this cmdlet causes loss of network connectivity depending on the binding
that is disabled. Note: Disabling some adapter bindings can automatically enable other network adapter bindings.
Free 70-680 Questions Answers
You administer client computers that have Windows 7 Professional SP1 64-bit installed. All the computers are
members of a single Active Directory
You need to prevent users from installing non- trusted device drivers.
What should you do?
A. Run the SigVerif.exe command on each computer
B. Enable the Code signing for device drivers in a domain Group Policy.
C. Disable the Code signing for device drivers in a domain Group Policy.
D. Add each user to the Domain Admins group.
Free 70-534 Questions Answers
You need to ensure that users do not need to re-enter their passwords after they authenticate to cloud applications for the first time.
What should you do?
A. Enable Microsoft Account authentication
B. Set up a virtual private network (VPN) connection between the VanArsdel premises and Azure datacenter.
Set up a Windows Active Directory domain controller in Azure VM.
Implement Integrated Windows authentication.
C. Deploy ExpressRoute
D. Configure Azure Active Directory Sync to use single sign-on (SSO).